Step-by-step guide: How to execute a flawless 10 80 in snowboarding

Snowboarding is a thrilling sport that attracts thousands of people every winter season. While it’s often seen as an extreme sport, with the right techniques and preparation, anyone can enjoy snowboarding without injuries or falls. One of the most popular tricks in snowboarding is the 10 80 – a gravity-defying move that requires courage, skill and practice. In this step-by-step guide, you’ll learn how to execute a flawless 10 80 in snowboarding, so buckle up and get ready for some uphill fun!

Step 1: Check Your Gear
Before you hit the slopes to perform any tricks or stunts, make sure your gear fits properly and is well-maintained. Check your boots, bindings and board carefully before each ride, paying special attention to the screws, buckles and straps that might loosen during your ride.

Step 2: Choose the Right Terrain
Not all slopes are suitable for performing a 10 80 trick. You need to find a steep slope that has enough length to build speed but not too narrow that limits your movements or puts other riders at risk. It’s best to practice on smaller ramps before attempting a full-fledged ramp.

Step 3: Build Speed Gradually
The success of executing a flawless 10 80 lies in building momentum while hitting jumps smoothly and go-big when required. Don’t rush into trying this trick for the first time just after completing only one run through; work up your speed over several runs.

Step 4: Approach The Ramp With Confidence
When approaching the ramp position yourself properly with knees flexed under shoulders arms relaxing by side and chest lifted high with head facing forward across toe-side edge since this helps in better stability

Step5: Execute Your Jump
Once you reach the top of the ramp bend down low with weight shifting towards foot pads then spring off using mainly leg lifting hips upwards doing either pop or ollie jump maneuver, rolling your shoulders and leaning back slightly.

Step 6: Complete the Rotation
In mid-air, twist your entire body sharply towards the front shoulder while keeping your eyes glued to where you are going. Your board should be in a horizontal position for the full 360-degree rotation before touching down on the snowboard.

Step 7: Land with Confidence
As you reach the end of that mind-blowing spin keep up that balance, guiding yourself and landing with both feet firmly planted while staying centered over the board. Don’t forget to maintain core strength and engage knees in absorbing much impact.

Practice Makes Perfect
Remember, executing a flawless 10 80 takes time, practice and natural ability. Give yourself enough time to get comfortable with jumping technique adding difficulty by taking steps slow until you can do it naturally; Find someone who has mastered this trick to guide you through each step till you get this skill right. Once mastered, beware of delivering its spectacular effects of high speed conveying extreme fun when made during runs – Happy shredding!

Common questions answered: Your ultimate FAQ on what is a 10 80 in snowboarding

As an avid snowboarder, you may have encountered the term “10 80” before. If you’re not quite sure what it means, don’t worry! We’ve got your ultimate FAQ on this snowboarding trick covered.

What is a 10 80 in snowboarding?
A 10 80 in snowboarding refers to a trick that involves spinning a full 1080 degrees while airborne. This is accomplished by throwing one complete horizontal spin (360 degrees) followed by two vertical spins (540 degrees each) – for a total of three rotations.

Who invented the 10 80?
The first recorded instance of someone landing a 10 80 was Shaun White at the Winter X Games in Aspen, Colorado back in January of 2006. At just 19 years old at the time, White made history as the first person ever to land this incredibly difficult and technical trick.

Is it hard to learn how to do a 10 80?
Absolutely! Landing a successful 10 80 requires incredible balance, control, and timing – not to mention some serious bravery. It’s definitely not something that can be mastered overnight and often requires hours upon hours of practice before successfully landing one.

What are some tips for learning how to do a proper 10 80?
If you want to try your hand at attempting a spin like this yourself, here are some key tips:

1) Start small: Don’t try jumping straight into the full-blown version of this trick right off the bat. Instead, work your way up through smaller jumps and gradually increase your speed and rotation over time.

2) Focus on technique: The key to nailing any complex maneuver like this is proper technique. Make sure you keep your body centered and focused throughout each rotation and avoid flailing or overcompensating mid-trick.

3) Practice makes perfect: As mentioned earlier, mastering something like this requires lots of practice – so don’t get discouraged if it takes a while to get it right.

Is the 10 80 still relevant in snowboarding today?
Despite the fact that the trick itself is more than a decade old at this point, the 10 80 is still very much considered one of the most difficult and impressive moves in all of snowboarding. When executed well, it’s an absolutely jaw-dropping display of skill and athleticism – and is sure to turn heads both on and off the slopes.

So there you have it – everything you need to know about this iconic snowboarding trick! Whether you’re looking to try it out for yourself or simply admire those who can pull it off with ease, there’s no denying that the 10 80 remains a true benchmark of excellence within the sport.

The evolution of the 10 80: A brief history of this popular snowboarding trick

The 1080. Three full rotations while airborne. It’s a trick that has become a staple in modern snowboarding, but it wasn’t always that way. In fact, the concept of spinning three times in the air was almost unheard of in the early days of snowboarding.

The first recorded instance of anyone attempting a 1080 was back in 1988 when Canadian snowboarder Ross Rebagliati tried to land it during a competition. He didn’t make it, but the idea had been planted. From there, the concept would be toyed with and developed over several years until someone finally landed one.

It was Shaun White who became the first person to successfully land a 1080 back in 2006 at an event in Mammoth Mountain, California. From there, it became a must-have trick for any aspiring pro snowboarder.

But before we get too far ahead of ourselves, let’s take a step back and look at how this trick evolved over time.

In the early days of snowboarding (the ’80s and early ’90s), tricks were much simpler than they are today. A lot of emphasis was placed on style and creativity rather than pure athleticism or technical ability. So when someone attempted to spin more than once while airborne, people took notice.

The first breakthrough came with the introduction of the “360” or “three-sixty.” This involved spinning once while airborne and was considered an extremely difficult feat at the time. Riders like Terry Kidwell and Craig Kelly were pioneers of this move and helped push snowboarding forward by introducing new levels of difficulty.

Then came the “540,” which added another half-spin to make two complete revolutions while airborne. This became commonplace among top-level riders by the mid-’90s and set up the groundwork for what would come next – you guessed it – The 720.

The 720 marked a significant step forward into uncharted territory. It was first landed by Todd Richards in 1994, and before long, it became the new benchmark for top-level riders. From there, it was only a matter of time before someone attempted to add another full rotation.

Ross Rebagliati’s attempt at the 1080 back in 1988 wasn’t successful, but it planted the seed for what would happen nearly two decades later when Shaun White successfully landed one at Mammoth Mountain.

Nowadays, the 1080 is considered almost standard among pro-level snowboarders. While not everyone can land one consistently or with style, any top-level rider who wants to compete with the best must have this trick down pat.

So while we may take this maneuver for granted nowadays, let’s not forget that it took decades of experimentation and incremental progress to get us here. Every iteration of this trick built upon what came before until we arrived at the glorious three spins that we see today – The Holy Grail of Snowboarding Tricks: The 1080.

Exploring the limits: How pro snowboarders take their 10 80s to the next level

When it comes to pushing the boundaries of what’s possible in snowboarding, professional riders are constantly exploring new frontiers – and few tricks demonstrate this ethos better than the 1080. While once thought impossible or at least unrealistic, snowboarders have been spinning multiple times around various axes for years now. So how do they go from just a 10 80 to something even more breathtaking? Let’s take a look.

First, let’s break down what we mean by a 1080. This trick involves rotating around three full revolutions (or 1080 degrees) while airborne. The rider launches themselves off a ramp or jump and begins to spin as they fly through the air. It takes an enormous amount of skill and precision timing to make it happen, but pro snowboarders these days have largely mastered the art.

So what happens when you want to take your typical 1080 to the next level? Well, first of all, you need nerves of steel and an extremely clear head – this is not a trick for easily rattled boarders. Riders who want to add extra flair might try adjusting their grab mid-spin, holding longer or letting go sooner than usual.

Another option is incorporating different types of spins into one big move. For instance, riders can start out with a frontside spin (rotating towards their toes) before transitioning seamlessly into backside spin (toward their heels). This is sometimes known as a “corkscrew” or “switch back triple”.

But perhaps even more impressive than adding twists on top of twists is achieving greater height and distance on the jump itself. Some pro boarders use special training techniques like trampolines or foam pits to practice launching themselves higher into the air and getting more hang time before executing their spins.

Of course, there are always some riders looking for ways to push beyond even that – such as attempting four full rotations (or even more), though we’re still waiting for the first rider to successfully pull off a quadruple cork.

All in all, watching pro snowboarders tackle 1080s (or even more mind-boggling variations) is an awe-inspiring sight. It takes incredible skill, athleticism, and courage to make it happen – and as these riders continue to explore just how far they can push themselves, there’s no telling what the future holds for this amazing sport.

Learn from the pros: Tips and tricks for mastering the perfect 10 80 in snowboarding

Snowboarding is an exhilarating sport that’s fun to watch and even more thrilling to take part in. However, if you’re aiming for the perfect score of 10 in snowboarding competitions, it takes a lot of skill, practice, and patience. The best snowboarders have put years into mastering their techniques and tricks. If you want to follow in their footsteps, there are some tips and tricks that you can learn from these pros to help enhance your skills on the board.

Here are some useful tips to consider when aiming for the perfect 10:

1. Study the course: Every competition has different terrain features such as rails, jumps, halfpipes or quarterpipes that you need to be familiar with before starting your run. Make sure you understand every element of the course so that you can execute your moves accordingly.

2. Start small: Whenever learning a new trick or technique start out on smaller features first. Mastering each element of a trick like jumping, spinning or grabbing will help build up your confidence gradually and reduce injuries.

3. Flexibility: Proper stretching exercises before getting onto the board will improve flexibility which allows easier body maneuvering during spins and flips resulting in smoother landings.

4. Maintain good posture: Keeping yourself centered over the board using proper posture promotes better balance which can prevent falls or crashes.

5. Speed control: Learning how to adjust speed while riding down slopes by carving back and forth will set up approaches for gaining momentum leading into key elements along the course.

6.Practice makes perfect! Committing time on a daily basis helps promote muscle memory success through repetition allowing your mind-muscle connection quicker response times when needed most under challenging circumstances.

7.Work with a coach/trainer- Working closely with trained professional coaches who know how best assist practice sessions playing an integral role towards developing proper technique under varied weather conditions ensuring correct form/alignment and fluidity all key factors required towards achieving high scores.

8. PMA- Positive Mental Attitude: Snowboarding, like any other sport requires mental focus encouraging positive self-talk enabling a sense of calm while in the flow or zone on runs.

In conclusion, snowboarding is an adrenaline-fueled adventure that takes time and dedication to master. Aiming for the perfect 10 requires a lot of practice as well as learning from pros across the industry. Incorporating these tips and tricks can help take you closer to achieving this goal. Stay focused, stay determined, and above all else – have fun out there!

Top five facts you need to know about what is a 10 80 in snowboarding

Snowboarding is a popular winter sport that has been around since the 1960s. It wasn’t until the early 2000s, however, when professional snowboarder Shaun White performed a 10 80 trick during the Winter X Games, igniting widespread interest and excitement in extreme snowboarding. But what exactly is a 10 80 in snowboarding?

1. Definition: A 10 80 in snowboarding is an aerial trick that involves spinning two and a half rotations (720 degrees) horizontally while performing one and a half flips (540 degrees) vertically. Simply put, it’s like doing two full spins in mid-air while simultaneously flipping yourself over once.

2. Difficulty: To execute a successful 10 80 takes stamina, skill, strength, balance and guts! It’s not easy to rotate your body twice while still managing to flip completely over – making this one of the most complex tricks in the world of snowboarding. You have to have absolute control of your board while you’re spinning through the air.

3. Risk factor: Performing any type of aerial maneuver comes with an inherent risk but attempting a 10-80 takes it to another level altogether! The degree of difficulty involved makes this move very dangerous for riders who aren’t experienced enough or don’t have good control skills; adding to that, landing improperly can result in serious injury or worse.

4. Competition level value: Nowadays there are so many spectacular tricks being performed by extreme sports athletes all around the globe making competitions incredibly intense and exciting for fans as well as competitors alike! Back when Shaun White first landed his famous “Tomahawk” technique (his signature finish), scoring was done on-and-off based on one’s style points rather than actual performance… because no one had ever seen anything like it before!

5. Progressive nature: The evolution of stunts/tricks being attempted by snowboarders continues every year with new and exciting aerial maneuvers being created all the time. The development has led to many riders attempting incredibly hard techniques like 12 60, which is an even more challenging variation of Shaun White’s legendary move – simply put, it’s three spins and one-and-a-half flips in mid-air!

In conclusion, a 10-80 snowboarding trick is not only impressive but also potentially dangerous, extreme sports athletes take great risks performing such maneuvers. Be sure you’re up for the challenge if you decide to put your skills and senses on display – good luck and stay safe!


Leave a Reply

Your email address will not be published. Required fields are marked *